Skip to content

Brushless Blowers - Low and High Voltage Blowers

Nautilair variable speed brushless blowers have been engineered to deliver a measured air/fuel mixture in gas-fired burner systems for optimized combustion and reduced nitrous oxide and carbon monoxide emissions. These combustion blowers offer practical solutions for a wide range of applications, including commercial and residential boilers, hot water heaters, furnaces, food service equipment, kilns, and fuel cells, among others.

They serve as ideal alternatives to conventional speed or two-speed blowers, intake damper systems on fixed speed blowers, or inverter-driven variable speed blowers. When used with a modulating gas valve, these compact, lightweight, rugged, versatile, and high-speed blowers can suit a wide range of system designs. 

Speed can be adjusted internally with an on board potentiometer or with an external PWM or DC control that actively varies blower performance (eliminating a need for complex air intake damper systems); internal electronics convert AC input to DC; and blowers typically operate in excess of 20,000 hours virtually maintenance-free.

The Nautilair brushless blower products are available in 3 series: 7.6", 8.9", 12.3" and these combustion blowers accept line voltage inputs of 120VAC, 240VAC and 12-24VDC depending on the model.

Among options, an Intelligen II electronic control drive integrating a factory-programmed digital signal processor (DSP) can customize performance for specific combustion application requirements.

  • AMETEK DFS Nautilair 7.6" blower
    Nautilair 7.6

    Learn how a pre-mix blower can fit your gas burner application. Applications include: commercial and residential boilers, hot water heaters, kilns, furnaces, food service equipment, and fuel cells.

    Keep Reading
  • AMETEK DFS Nautilair 8.9" blower
    Nautilair 8.9

    Learn how a pre-mix blower can fit your gas burner application. Applications include: commercial and residential boilers, hot water heaters, kilns, furnaces, food service equipment, and fuel cells.

    Keep Reading
  • AMETEK DFS Nautilair 12.3" blower
    Nautilair 12.3

    Learn how a pre-mix blower can fit your gas burner application. Applications include: commercial and residential boilers, hot water heaters, kilns, furnaces, food service equipment, and fuel cells.

    Keep Reading
  • Nautilair Pro 14" Combustion Blower
    Nautilair Pro 14"

    AMETEK Dynamic Fluid Solutions (DFS) added the Nautilair® Pro 14" blower to its robust combustion product line, providing even more size, power, and performance options to hydronic system manufacturers. Hydronic systems today oftentimes require larger boilers that need more air flow. With the addition of the 14" blower to the existing line of 7.6", 8.9", and 12.3” blowers, AMETEK DFS' end-to-end product line can accommodate air power levels from .05M up to 6M BTU/hr and voltage inputs of 120VAC, 240VAC, and now 380-575VAC.

    Keep Reading